Tube clamp fitting | Variable elbow, 40-70°
Required where the posts and the upper element are not at right angles but between 40-70°.
| Part number | Tube diameter | Weight (in kg) | Dimension a in drawing (in mm) | Dimension b in drawing (in mm) |
| 123D48 | Ø 48.3 mm 1 ½" | 1.16 | 120 | 134 |
This item is distinguished by simple, sturdy workmanship. Universally usable for a wide range of applications!
Not the right tube clamp fitting?
No problem, we can supply this type of fitting in a wide variety of shapes. We are glad to help you over the phone.
Technical data
| Part number | 123D48 |
| For tube outside diameter | Ø 48.3 mm |
| Material | malleable cast iron to ASTM A197 |
| Surface | hot-dip galvanised to ASTM A153, additionally electro-galvanised |
| Minimum wall thickness | 2.5 mm |
| Permissible bending moment | 1.3 kNm |
| Permissible slip resistance | 9.1 kN |
| Grub screw | stainless steel self-tapping screw 3/8", tightening torque 40 Nm |
| Safety factor | 2.0 |
| Testing | TÜV Rheinland type-tested, test report no. 17704961 001 |
Installation
Insert the tube into the fitting, align it and tighten the supplied stainless steel self-tapping screw to the specified tightening torque. The screw cuts its own thread into the tube – no pre-drilling, no thread cutting, no welding. An Allen key is all the tooling required.
Note: Under dynamic loading, check the screwed connections for tightness at regular intervals and re-tighten them. Not suitable for use in scaffolding construction.
Angaben zur Produktsicherheit
|
Verantwortliche Person: FeNau GmbH Veit-Stoß-Str.20 90579 Langenzenn Deutschland https://www.fenau.eu info@fenau.eu |
Herstellerinformationen: FeNau GmbH Veit-Stoß-Str.20 90579 Langenzenn Deutschland https://www.fenau.eu info@fenau.eu |
