Tube clamp fitting | Fixing ring with flange - 2 holes
The fixing ring with flange and 2 fixing holes provides secure support for tubes running close to a wall or ceiling.
| Article number | Tube diameter | Weight (in kg) | Dimension a in drawing (in mm) | Dimension b in drawing (in mm) | Dimension c in drawing (in mm) |
| 198A27 | Ø 21.3 mm ½" | 0.30 | 35 | 128 | 94 |
| 198B34 | Ø 33.7 mm 1" | 0.29 | 30 | 120 | 86 |
| 198C42 | Ø 42.4 mm 1 ¼" | 0.37 | 33 | 130 | 95 |
| 198D48 | Ø 48.3 mm 1 ½" | 0.43 | 35 | 140 | 104 |
This item is characterised by simple and sturdy workmanship. Universally usable for a wide range of applications!
Not the right tube clamp fitting?
No problem, we can supply this type of fitting in a wide variety of shapes. We will gladly help you by telephone.
Technical data
| Article number | 198D48 |
| For tube outside diameter | Ø 48.3 mm |
| Material | malleable cast iron to ASTM A197 |
| Surface | hot-dip galvanised to ASTM A153, additionally electro-galvanised |
| Minimum wall thickness | 2.5 mm |
| Permissible bending moment | 1.1 kNm |
| Permissible slip resistance | 7.8 kN |
| Grub screw | stainless steel self-tapping screw 3/8", tightening torque 40 Nm |
| Safety factor | 2.0 |
| Testing | TÜV Rheinland type-tested, test report no. 17704961 001 |
Installation
Push the tube into the fitting, align it and tighten the supplied stainless steel self-tapping screw to the stated tightening torque. The screw cuts its own thread into the tube – no pre-drilling, no thread cutting, no welding. An Allen key is the only tool required.
Note: Under dynamic loading, check the screwed connections for tightness at regular intervals and re-tighten them. Not suitable for use in scaffolding construction.
Angaben zur Produktsicherheit
|
Verantwortliche Person: FeNau GmbH Veit-Stoß-Str.20 90579 Langenzenn Deutschland https://www.fenau.eu info@fenau.eu |
Herstellerinformationen: FeNau GmbH Veit-Stoß-Str.20 90579 Langenzenn Deutschland https://www.fenau.eu info@fenau.eu |
