Adjustable angle joint
This variable malleable cast iron angle joint is used in pairs so that any angle between the horizontal tubes from 85° to 135° can be set. A type 133 plug is recommended to finish the post.
Please note: 2 pieces are shown here, but the prices apply to 1 piece!
| Part number | Tube diameter | Weight (in kg) | Dimension a in drawing (in mm) | Dimension b in drawing (in mm) | Dimension c in drawing (in mm) |
| 148A27 | Ø 26.9 mm ¾" | 0.18 | 53 | 37 | 42 |
| 148B34 | Ø 33.7 mm 1" | 0.27 | 59 | 46 | 48 |
| 148C42 | Ø 42.4 mm 1 ¼" | 0.42 | 73 | 55 | 59 |
| 148D48 | Ø 48.3 mm 1 ½" | 0.60 | 93 | 61 | 78 |
This item is distinguished by simple, sturdy workmanship. Universally usable for a wide range of applications!
Not the right tube clamp fitting?
No problem, we can supply this type of fitting in a wide variety of shapes. We are glad to help you over the phone.
Technical data
| Part number | 148D48 |
| For tube outside diameter | Ø 48.3 mm |
| Material | malleable cast iron to ASTM A197 |
| Surface | hot-dip galvanised to ASTM A153, additionally electro-galvanised |
| Minimum wall thickness | 2.5 mm |
| Permissible bending moment | 0.7 kNm |
| Permissible slip resistance | 7.0 kN |
| Grub screw | stainless steel self-tapping screw 3/8", tightening torque 40 Nm |
| Safety factor | 2.0 |
| Testing | TÜV Rheinland type-tested, test report no. 17704961 001 |
Installation
Insert the tube into the fitting, align it and tighten the supplied stainless steel self-tapping screw to the specified tightening torque. The screw cuts its own thread into the tube – no pre-drilling, no thread cutting, no welding. An Allen key is all the tooling required.
Note: Under dynamic loading, check the screwed connections for tightness at regular intervals and re-tighten them. Not suitable for use in scaffolding construction.
