Cross 30 - 45°
With this tube clamp fitting you can connect a horizontal and a vertical tube to each other. You also have the option of connecting these two tubes at an angle of 30 - 45°.
| Article number | Tube diameter | Weight (in kg) | Dimension a in drawing (in mm) |
| 126D48 | Ø 48.3 mm 1 ½" | 1.09 | 218 |
This item is characterised by simple and sturdy workmanship. Universally usable for a wide range of applications!
Not the right tube clamp fitting?
No problem, we can supply this type of fitting in a wide range of shapes. We will gladly help you over the phone.
Technical data
| Article number | 126D48 |
| For tube outside diameter | Ø 48.3 mm |
| Material | Malleable cast iron to ASTM A197 |
| Surface finish | hot-dip galvanised to ASTM A153, additionally electro-galvanised |
| Minimum wall thickness | 2.5 mm |
| Permissible bending moment | 1.4 kNm |
| Permissible slip resistance | 7.0 kN |
| Grub screw | Stainless steel self-tapping screw 3/8", tightening torque 40 Nm |
| Safety factor | 2.0 |
| Testing | TÜV Rheinland type-tested, test report no. 17704961 001 |
Installation
Push the tube into the fitting, align it and tighten the supplied stainless steel self-tapping screw to the specified tightening torque. The screw cuts its own thread into the tube – no pre-drilling, no thread cutting, no welding. An Allen key is the only tool required.
Note: Under dynamic loading, check the screw connections for tightness at regular intervals and retighten them. Not suitable for use in scaffolding construction.
Angaben zur Produktsicherheit
|
Verantwortliche Person: FeNau GmbH Veit-Stoß-Str.20 90579 Langenzenn Deutschland https://www.fenau.eu info@fenau.eu |
Herstellerinformationen: FeNau GmbH Veit-Stoß-Str.20 90579 Langenzenn Deutschland https://www.fenau.eu info@fenau.eu |
