Adjustable corner fitting
This adjustable corner fitting in malleable cast iron is suitable for a flexible connection between two tubes. It is held solely by the two tubes and is therefore extremely versatile.
| Article number | Tube diameter | Weight (in kg) | Dimension a in drawing (in mm) | Dimension b in drawing (in mm) |
| 125HB34 | For Ø 33.7 mm 1" | 0.60 | 62 | 27 |
| 125HC42 | For Ø 42.4 mm 1 ¼" | 0.87 | 75 | 32 |
| 125HD48 | For Ø 48.3 mm 1 ½" | 1.05 | 85 | 35 |
This item is characterised by simple and sturdy workmanship. Universally usable for a wide range of applications!
Not the right tube clamp fitting?
No problem, we can supply this type of fitting in a wide range of shapes. We will gladly help you over the phone.
Technical data
| Article number | 125HD48 |
| For tube outside diameter | Ø 48.3 mm |
| Material | Malleable cast iron to ASTM A197 |
| Surface finish | hot-dip galvanised to ASTM A153, additionally electro-galvanised |
| Minimum wall thickness | 2.5 mm |
| Permissible bending moment | 0.8 kNm |
| Grub screw | Stainless steel self-tapping screw 3/8", tightening torque 40 Nm |
| Safety factor | 2.0 |
| Testing | TÜV Rheinland type-tested, test report no. 17704961 001 |
Installation
Push the tube into the fitting, align it and tighten the supplied stainless steel self-tapping screw to the specified tightening torque. The screw cuts its own thread into the tube – no pre-drilling, no thread cutting, no welding. An Allen key is the only tool required.
Note: This tube clamp fitting is not intended for handrail and railing construction and not for scaffolding construction. Under dynamic loading, check the screw connections for tightness regularly and retighten them.
Angaben zur Produktsicherheit
|
Verantwortliche Person: FeNau GmbH Veit-Stoß-Str.20 90579 Langenzenn Deutschland https://www.fenau.eu info@fenau.eu |
Herstellerinformationen: FeNau GmbH Veit-Stoß-Str.20 90579 Langenzenn Deutschland https://www.fenau.eu info@fenau.eu |
